Preso, a brand of Badger Meter, introduces its Gemini Differential Pressure Flow Meter. This meter is great for steam systems and has an extremely stable signal for measurement with minimal wear on the cone edge. Visit our steam and condensate page and look under flow meters for more information.
Categories
- Air and Dirt Control
- Air and Dirt Control
- Announcements
- Boilers
- Codes and Standards
- Codes and Standards
- Commissioning and Balance
- Controls
- Cooling Towers
- Electrical
- Expansion and Noise Control
- Flow Measurement
- Flow Meters
- Glycol and Water Quality
- Glycol and Water Quality
- Heat Exchangers
- Humidifiers
- Hydronic Design
- Hydronic System Design
- Affinity Laws
- Air Separators
- Chemical Feed
- Chilled Water
- Cold Water Makeup
- Commissioning and Balance
- Control Valves
- Cooling
- Design Tools
- Expansion and Noise Control
- Expansion/Compression Tank
- Expansion/Compression Tanks
- Heating
- Parallel Pumping
- Pipe Sizing
- Primary Secondary
- Primary Secondary Piping
- Primary Variable
- Primary Variable Piping
- Test and Balance
- Vibration
- Monday Morning Minutes
- Motors
- Plumbing System Design
- Plumbing Systems
- Press
- Pressure Gauges and Thermometers
- Pumps
- Affinity Laws
- Balancing
- Chilled Water
- Commisioning and Balance
- Commissioning and Balance
- Condensate
- Constant Speed
- Cooling Towers
- Domestic Water Recirculation
- ECM
- Glycol
- Hot Water Recirculation
- Identification
- Installation
- Minimum Flow
- NPSH
- Operation
- Parallel Pumping
- Piping and Installation
- Pressure Boosters
- Primary Secondary
- Selection and Specification
- Selection and Specification
- Speed
- Sump and Sewage
- Troubleshooting
- Variable Speed
- Service Tip of the Month
- Steam
- Steam System Design
- Strainers
- Tanks
- Test and Balance
- Troubleshooting
- Valves
- Variable Frequency Drives
- Variable Speed Drives
- Vibration
- Vibration and Expansion Control
- Water Heaters
- Water Quality