Representing Quality Fluid Handling Products
in Michigan and Northern Ohio
  • Monday Morning Minutes

  • News Categories

    • Announcements (16)
    • Cooling Towers (13)
    • Dirt Separation (2)
    • Humidification (5)
    • Monday Morning Minutes (159)
    • System Syzer (10)
    • Uncategorized (3)
    • Water Quality (3)

    • Southfield, MI
      20929 Bridge St
      Southfield, MI 48033
      Ph: (248) 354-3710
      Fax: (248) 354-3763
    • Grand Rapids, MI
      4121 Brockton St
      Grand Rapids, MI 49512
      Ph: (616) 656-0821
      Fax: (616) 656-0830
    • Bridgeport, MI
      6200 Baron Drive
      Bridgeport, MI 48722
      Ph: (989) 652-3049
      Fax: (989) 652-3324
    • Brecksville, OH
      6910 Treeline Drive, Suite A
      Brecksville, OH 44141
      Ph: (440) 526-2439
      Fax: (440) 526-6454
  • Boiler Outdoor Reset and Effects on Condensing Boiler (Part 3)

    By Brad Notter | December 7, 2009

    with edit by Norm Hall

    Printer Friendly (PDF)

    Let’s continue to examine the reset example we started last week. Using the
    reset schedule below as our example, we know our supply water temperature will be 120° at an outdoor temperature of 40° and the return water would be at 110°or even lower.

    As the boiler return water is lowered below 140 degrees, condensing starts to occur and in a condensing boiler, the efficiency is increased.

    This increase in efficiency is due to the capture of the latent (hidden heat) of the flue gas turning into condensate. For every pound of condensate made by the boiler, 970 BTUs are recovered. In our example above of 110 degree return water, the efficiency of the boiler operating at 100% input is increased from 86% to 89%. For a 2 million BTU boiler operating at 100 percent input, the 3% increase is equal to 60,000 BTU from 7.75 gallons of condensate.

    If we couple the higher efficiency due to temperature with the higher efficiency due to turndown (see Oct 26th & Nov 2nd MMM), we have the increased efficiency of the AERCO boiler.
    As the boiler modulates to a lower input firing rate, the efficiency is increased due to the fact the heat transfer surface of the boiler does not change and that surface can capture more of the heat from the burner. If the boiler is operating at 5% input, the efficiency is increased from 86.5% to 92.5%.

    Matching the heat generated by a heating plant to the heat lost by the building is now a reality, not just something we have to dream about anymore. By implementing AERCO condensing modulating boilers the high turndown ratio and the full capability of outdoor reset the will definitely save you or your customer some green and is “green” at the same time.

    Thank you for using products sold by R. L. Deppmann Company in Michigan and Ohio!

    Disclaimer: R. L. Deppmann and it’s affiliates can not be held liable for issues caused by use of the information on this page. While the information comes from many years of experience and can be a valuable tool, it may not take into account special circumstances in your system and we therefore can not take responsibility for actions that result from this information. Please feel free to contact us if you do have any questions.

    Archives – Click here for Past Articles